Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Trane CVHF 2300kW/8.10COP/Vanes, !- Name
2299900, !- Reference Capacity {W}
8.10, !- Reference COP {W/W}
4.44, !- Reference Leaving Chilled Water Temperature {C}
19.58, !- Reference Leaving Condenser Water Temperature {C}
0.07571, !- Reference Chilled Water Flow Rate {m3/s}
0.09085, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Trane CVHF 2300kW/8.10COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 2300kW/8.10COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 2300kW/8.10COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.23, !- Minimum Part Load Ratio
1.04, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.23, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Trane_CVHF_2300kW_8_10COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -2299900, COP_nominal = 8.10, PLRMin = 0.23, PLRMinUnl = 0.23, PLRMax = 1.04, mEva_flow_nominal = 1000*0.07571, mCon_flow_nominal = 1000*0.09085, TEvaLvg_nominal = 273.15 + 4.44, TConLvg_nominal = 273.15 + 19.58, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 19.58, TConLvgMax = 273.15 + 34.79, capFunT = {4.945951E-02, 1.763194E-02, -1.707908E-03, 8.024411E-02, -2.301455E-03, 2.334434E-03}, EIRFunT = {6.870347E-01, 1.176508E-02, 5.473075E-04, 1.235577E-02, 3.200085E-04, -1.378535E-03}, EIRFunPLR = {-8.187804E-01, 9.052788E-02, -2.443564E-04, -2.116230E+00, 5.680799E+00, -7.780553E-02, 0.000000E+00, -1.907348E+00, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos