Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Trane CVHF 4677kW/6.27COP/Vanes, !- Name
4677100, !- Reference Capacity {W}
6.27, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
31.94, !- Reference Leaving Condenser Water Temperature {C}
0.20138, !- Reference Chilled Water Flow Rate {m3/s}
0.24605, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Trane CVHF 4677kW/6.27COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 4677kW/6.27COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 4677kW/6.27COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.41, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.41, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Trane_CVHF_4677kW_6_27COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -4677100, COP_nominal = 6.27, PLRMin = 0.41, PLRMinUnl = 0.41, PLRMax = 1.03, mEva_flow_nominal = 1000*0.20138, mCon_flow_nominal = 1000*0.24605, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 31.94, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 7.78, TConLvgMin = 273.15 + 17.51, TConLvgMax = 273.15 + 31.94, capFunT = {8.138295E-01, -2.315871E-02, 6.181089E-03, 8.639578E-03, -1.807173E-04, -5.015921E-05}, EIRFunT = {8.371931E-01, -1.837487E-02, 3.992101E-03, -8.582353E-03, 6.821892E-04, -1.443699E-03}, EIRFunPLR = {-3.243462E-01, 1.463635E-02, -8.320365E-05, 1.978667E+00, -2.019795E+00, -1.072468E-02, 0.000000E+00, 1.320583E+00, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos