Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Trane CVHG670-44&86 2490kW/6.5COP, !- Name
2490036, !- Reference Capacity {W}
6.505, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
35.24, !- Reference Leaving Condenser Water Temperature {C}
0.08894, !- Reference Chilled Water Flow Rate {m3/s}
0.13400, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Trane CVHG670-44&86 2490kW/6.5COP CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Trane CVHG670-44&86 2490kW/6.5COP EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Trane CVHG670-44&86 2490kW/6.5COP EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.087, !- Minimum Part Load Ratio
1.001, !- Maximum Part Load Ratio
0.801, !- Optimum Part Load Ratio
0.087, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
5.6, !- Leaving Chilled Water Lower Temperature Limit {C}
VariableFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Trane_CVHG670_44_86_2490kW_6_5COP = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -2490036, COP_nominal = 6.505, PLRMin = 0.087, PLRMinUnl = 0.087, PLRMax = 1.001, mEva_flow_nominal = 1000*0.08894, mCon_flow_nominal = 1000*0.13400, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 35.24, TEvaLvgMin = 273.15 + 5.60, TEvaLvgMax = 273.15 + 7.20, TConLvgMin = 273.15 + 30.8, TConLvgMax = 273.15 + 36.9, capFunT = {0.403602663, -0.006794189, -0.000564953, 0.046104574, -0.00117838, 0.00215062}, EIRFunT = {1.056335684, 0.045975279, 0.001839862, -0.028575058, 0.000935916, -0.002552237}, EIRFunPLR = {0.243594787, -0.017680952, 0.000731787, 0.848300868, -0.358252903, 0.000896547, -9.0516E-06, 0.736449508, 0.000316148, -0.022213923}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos