.Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.ReformEIRChiller_Trane_RTHC_1066kW_5_73COP_Valve

Information

Chiller:Electric:ReformulatedEIR,
    ReformEIRChiller Trane RTHC 1066kW/5.73COP/Valve,  !- Name
    1065500,                 !- Reference Capacity {W}
    5.73,                    !- Reference COP {W/W}
    5.56,                    !- Reference Leaving Chilled Water Temperature {C}
    32.06,                   !- Reference Leaving Condenser Water Temperature {C}
    0.05142,                 !- Reference Chilled Water Flow Rate {m3/s}
    0.04416,                 !- Reference Condenser Water Flow Rate {m3/s}
    ReformEIRChiller Trane RTHC 1066kW/5.73COP/Valve CAPFT,  !- Cooling Capacity Function of Temperature Curve Name
    ReformEIRChiller Trane RTHC 1066kW/5.73COP/Valve EIRFT,  !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
    ReformEIRChiller Trane RTHC 1066kW/5.73COP/Valve EIRFPLR,  !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
    0.30,                    !- Minimum Part Load Ratio
    1.01,                    !- Maximum Part Load Ratio
    1.0,                     !- Optimum Part Load Ratio
    0.30,                    !- Minimum Unloading Ratio
    Chilled Water Side Inlet Node,  !- Chilled Water Inlet Node Name
    Chilled Water Side Outlet Node,  !- Chilled Water Outlet Node Name
    Condenser Side Inlet Node,  !- Condenser Inlet Node Name
    Condenser Side Outlet Node,  !- Condenser Outlet Node Name
    1.0,                     !- Compressor Motor Efficiency
    2.0,                     !- Leaving Chilled Water Lower Temperature Limit {C}
    ConstantFlow,            !- Chiller Flow Mode Type
    0.0;                     !- Design Heat Recovery Water Flow Rate {m3/s}

Definition

record ReformEIRChiller_Trane_RTHC_1066kW_5_73COP_Valve = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1065500, COP_nominal = 5.73, PLRMin = 0.30, PLRMinUnl = 0.30, PLRMax = 1.01, mEva_flow_nominal = 1000*0.05142, mCon_flow_nominal = 1000*0.04416, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 32.06, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 27.08, TConLvgMax = 273.15 + 33.00, capFunT = {1.132006E+00, 5.350322E-02, 4.674089E-04, -9.696767E-03, -1.092622E-05, -6.864058E-04}, EIRFunT = {1.270619E+00, 2.714576E-02, 1.314069E-03, -7.074240E-02, 2.188506E-03, -2.478095E-03}, EIRFunPLR = {-5.639468E-01, 3.938489E-02, 1.732511E-04, 1.260815E+00, 8.111637E-01, -4.893450E-02, 0.000000E+00, -3.768289E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);