.Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.ReformEIRChiller_York_YT_1023kW_5_81COP_Vanes

Information

Chiller:Electric:ReformulatedEIR,
    ReformEIRChiller York YT 1023kW/5.81COP/Vanes,  !- Name
    1023300,                 !- Reference Capacity {W}
    5.81,                    !- Reference COP {W/W}
    6.67,                    !- Reference Leaving Chilled Water Temperature {C}
    35.51,                   !- Reference Leaving Condenser Water Temperature {C}
    0.02366,                 !- Reference Chilled Water Flow Rate {m3/s}
    0.04732,                 !- Reference Condenser Water Flow Rate {m3/s}
    ReformEIRChiller York YT 1023kW/5.81COP/Vanes CAPFT,  !- Cooling Capacity Function of Temperature Curve Name
    ReformEIRChiller York YT 1023kW/5.81COP/Vanes EIRFT,  !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
    ReformEIRChiller York YT 1023kW/5.81COP/Vanes EIRFPLR,  !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
    0.09,                    !- Minimum Part Load Ratio
    1.06,                    !- Maximum Part Load Ratio
    1.0,                     !- Optimum Part Load Ratio
    0.09,                    !- Minimum Unloading Ratio
    Chilled Water Side Inlet Node,  !- Chilled Water Inlet Node Name
    Chilled Water Side Outlet Node,  !- Chilled Water Outlet Node Name
    Condenser Side Inlet Node,  !- Condenser Inlet Node Name
    Condenser Side Outlet Node,  !- Condenser Outlet Node Name
    1.0,                     !- Compressor Motor Efficiency
    2.0,                     !- Leaving Chilled Water Lower Temperature Limit {C}
    ConstantFlow,            !- Chiller Flow Mode Type
    0.0;                     !- Design Heat Recovery Water Flow Rate {m3/s}

Definition

record ReformEIRChiller_York_YT_1023kW_5_81COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1023300, COP_nominal = 5.81, PLRMin = 0.09, PLRMinUnl = 0.09, PLRMax = 1.06, mEva_flow_nominal = 1000*0.02366, mCon_flow_nominal = 1000*0.04732, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 35.51, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 18.34, TConLvgMax = 273.15 + 40.55, capFunT = {-3.395788E-01, -3.084319E-02, -5.520572E-03, 1.112148E-01, -2.662980E-03, 5.099892E-03}, EIRFunT = {6.129429E-01, -1.403780E-02, 1.331529E-03, -2.182097E-04, 5.502817E-04, -1.092920E-03}, EIRFunPLR = {2.511511E-01, 8.555669E-03, -3.399815E-05, -2.271964E-01, 1.450679E+00, -6.729414E-03, 0.000000E+00, -4.981512E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);