Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller York YT 1758kW/5.76COP/VSD, !- Name
1758300, !- Reference Capacity {W}
5.76, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
32.27, !- Reference Leaving Condenser Water Temperature {C}
0.06309, !- Reference Chilled Water Flow Rate {m3/s}
0.06309, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller York YT 1758kW/5.76COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller York YT 1758kW/5.76COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller York YT 1758kW/5.76COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.10, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.10, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_York_YT_1758kW_5_76COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1758300, COP_nominal = 5.76, PLRMin = 0.10, PLRMinUnl = 0.10, PLRMax = 1.03, mEva_flow_nominal = 1000*0.06309, mCon_flow_nominal = 1000*0.06309, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 32.27, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.51, TConLvgMin = 273.15 + 21.27, TConLvgMax = 273.15 + 32.81, capFunT = {1.960842E-01, 1.462778E-01, -4.568082E-03, 3.185311E-02, -6.290125E-04, -1.279459E-03}, EIRFunT = {9.622331E-01, 8.325124E-02, -2.403189E-03, -3.668907E-02, 1.323874E-03, -2.828319E-03}, EIRFunPLR = {4.914420E-01, -3.736264E-02, -1.708310E-04, 7.127945E-01, -1.838011E-01, 4.633977E-02, 0.000000E+00, -1.370201E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos