.Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.ReformEIRChiller_York_YT_1794kW_7_90COP_VSD

Information

Chiller:Electric:ReformulatedEIR,
    ReformEIRChiller York YT 1794kW/7.90COP/VSD,  !- Name
    1793500,                 !- Reference Capacity {W}
    7.90,                    !- Reference COP {W/W}
    7.22,                    !- Reference Leaving Chilled Water Temperature {C}
    28.90,                   !- Reference Leaving Condenser Water Temperature {C}
    0.05148,                 !- Reference Chilled Water Flow Rate {m3/s}
    0.09653,                 !- Reference Condenser Water Flow Rate {m3/s}
    ReformEIRChiller York YT 1794kW/7.90COP/VSD CAPFT,  !- Cooling Capacity Function of Temperature Curve Name
    ReformEIRChiller York YT 1794kW/7.90COP/VSD EIRFT,  !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
    ReformEIRChiller York YT 1794kW/7.90COP/VSD EIRFPLR,  !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
    0.10,                    !- Minimum Part Load Ratio
    1.05,                    !- Maximum Part Load Ratio
    1.0,                     !- Optimum Part Load Ratio
    0.10,                    !- Minimum Unloading Ratio
    Chilled Water Side Inlet Node,  !- Chilled Water Inlet Node Name
    Chilled Water Side Outlet Node,  !- Chilled Water Outlet Node Name
    Condenser Side Inlet Node,  !- Condenser Inlet Node Name
    Condenser Side Outlet Node,  !- Condenser Outlet Node Name
    1.0,                     !- Compressor Motor Efficiency
    2.0,                     !- Leaving Chilled Water Lower Temperature Limit {C}
    ConstantFlow,            !- Chiller Flow Mode Type
    0.0;                     !- Design Heat Recovery Water Flow Rate {m3/s}

Definition

record ReformEIRChiller_York_YT_1794kW_7_90COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1793500, COP_nominal = 7.90, PLRMin = 0.10, PLRMinUnl = 0.10, PLRMax = 1.05, mEva_flow_nominal = 1000*0.05148, mCon_flow_nominal = 1000*0.09653, TEvaLvg_nominal = 273.15 + 7.22, TConLvg_nominal = 273.15 + 28.90, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 17.43, TConLvgMax = 273.15 + 35.71, capFunT = {7.431766E-01, -1.738759E-01, 7.863010E-03, 6.780689E-02, -1.636950E-03, 3.409649E-03}, EIRFunT = {3.622079E-01, -1.249125E-01, 5.333823E-03, 5.641261E-02, -3.290614E-04, 8.180145E-06}, EIRFunPLR = {3.828090E-01, -1.598908E-02, -1.273038E-04, 5.991790E-01, -5.063099E-01, 2.273951E-02, 0.000000E+00, 4.390985E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);