.Buildings.Fluid.Chillers.ModularReversible.LargeScaleWaterToWater

Information

Large scale water-to-water chiller, using the Buildings.Fluid.Chillers.ModularReversible.Modular approach.

Contrary to the standard sizing approach for the Buildings.Fluid.Chillers.ModularReversible.Modular models, the parameters are based on an automatic estimation as described in Buildings.Fluid.HeatPumps.ModularReversible.BaseClasses.LargeScaleWaterToWaterDeclarations.

For more information on the approach, see UsersGuide.

The documentation of the model for cooling is at Buildings.Fluid.Chillers.ModularReversible.RefrigerantCycle.TableData2D.

Assumptions

• As heat losses are implicitly included in measured data in manufacturer dataseheets, heat losses are disabled.
• Pressure losses are not provided in datasheets. As typical values are unknown, the pressure loss is set to 0 to enable easier usage. However, the parameter is not final and should be replaced if pump electrical power consumption is of interest for your simulation aim.

Revisions

• Novemeber 11, 2022 by Fabian Wuellhorst:
  Implemented #1576)