.Buildings.Fluid.FMI.ExportContainers.Examples.FMUs

Information

This package contains examples for the use of models that can be found in Buildings.Fluid.FMI.ExportContainers.

Contents

Name Description
Fan Declaration of an FMU that exports a fan
FlowSplitter_u Declaration of an FMU that exports a flow splitter
HVACZone Declaration of an FMU that exports a simple convective only HVAC system
HVACZones Declaration of an FMU that exports a simple convective only HVAC system for two zones
HeaterCooler_u Declaration of an FMU that exports an ideal heater or cooler with prescribed heat flow rate
Heater_T Declaration of an FMU that exports an ideal heater or cooler with prescribed outlet temperature
Humidifier_u Declaration of an FMU that exports an ideal humidifier
IdealSource_m_flow Declaration of an FMU that exports a mass flow source and sink
MixingVolume Declaration of an FMU that exports a control volume
PressureDrop Declaration of an FMU that exports a fixed resistance
ResistanceVolume Declaration of an FMU that exports a flow resistance and control volume
ThermalZone Declaration of an FMU that exports a thermal zone
ThermalZones Declaration of an FMU that exports multiple thermal zones
TwoPortPassThrough Declaration of an FMU that exports a block that simply passes all the inputs to the outputs

Generated at 2021-04-19T01:01:50Z by OpenModelicaOpenModelica 1.18.0~dev-228-gf450566 using GenerateDoc.mos