.Buildings.Fluid.HeatExchangers.Validation .Buildings.Fluid.HeatExchangers.ValidationThis package contains models that validate the heat exchanger models. The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.
| Name | Description |
|---|---|
 ConstantEffectiveness | Model that demonstrates use of a heat exchanger with constant effectiveness |
 DryCoilEffectivenessNTU | Model that demonstrates use of a heat exchanger without condensation that uses the epsilon-NTU relation |
 EvaporatorCondenser | Test model for the evaporator or condenser model |
 HeaterCooler_u | Model that demonstrates the ideal heater model |
 PrescribedOutlet | Model that demonstrates the ideal heater/cooler model for a prescribed outlet temperature, configured as steady-state |
 PrescribedOutlet_dynamic | Model that demonstrates the ideal heater/cooler model for a prescribed outlet temperature, configured as dynamic |
 WetCoilCounterFlowLowWaterFlowRate | Model that tests a heat exchanger with prescribed boundary conditions, in terms of properties of inlet water and inlet air |
 WetCoilDiscretizedInitialization | Model that demonstrates use of a finite volume model of a heat exchanger with condensation |
 WetCoilDiscretizedInitializationPerfectGases | Model that demonstrates use of a finite volume model of a heat exchanger with condensation |
 WetCoilEffectivenessNTU | Model that validates the wet coil effectiveness-NTU model |
 WetCoilEffectivenessNTUCounterFlow | Model that validates the wet coil effectiveness-NTU model |
 WetCoilEffectivenessNTUHeating | Model that validates the wet coil effectiveness-NTU model in heating conditions |