.Buildings.Fluid.HeatExchangers

Information

This package contains models for heat exchangers with and without humidity condensation.

Contents

NameDescription
ConstantEffectivenessHeat exchanger with constant effectiveness
DryCoilCounterFlowCounterflow coil with discretization along the flow paths and without humidity condensation
DryCoilDiscretizedCoil with discretization along the flow paths and no humidity condensation
DryCoilEffectivenessNTUHeat exchanger with effectiveness - NTU relation and no moisture condensation
EvaporatorCondenserEvaporator or condenser with refrigerant experiencing constant temperature phase change
HeaterCooler_uHeater or cooler with prescribed heat flow rate
Heater_THeater with prescribed outlet temperature
PlateHeatExchangerEffectivenessNTUPlate heat exchanger with effectiveness - NTU relation and no moisture condensation
PrescribedOutletIdeal heater, cooler, humidifier or dehumidifier with prescribed outlet conditions
SensibleCooler_TSensible cooling device with prescribed outlet temperature
WetCoilCounterFlowCounterflow coil with discretization along the flow paths and humidity condensation
WetCoilDiscretizedCoil with discretization along the flow paths and humidity condensation
WetCoilEffectivenessNTUHeat exchanger with effectiveness - NTU relation and with moisture condensation
ActiveBeamsPackage with active beams
CoolingTowersPackage with cooling tower models
RadiantSlabsPackage with radiant slab models
RadiatorsPackage with radiators models for hydronic space heating systems
ExamplesCollection of models that illustrate model use and test models
ValidationCollection of models that validate the heat exchanger models
BaseClassesPackage with base classes for Buildings.Fluid.HeatExchangers

Generated at 2024-05-28T18:15:54Z by OpenModelicaOpenModelica 1.22.4 using GenerateDoc.mos