modelCouplingSpawnZ1
Example illustrating the coupling of a building model to heating water and chilled water loops
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This example illustrates the use of Buildings.DHC.Loads.BaseClasses.PartialBuilding, Buildings.DHC.Loads.BaseClasses.PartialTerminalUnit and Buildings.DHC.Loads.BaseClasses.FlowDistribution in a configuration with
- a one-zone building model based on an EnergyPlus envelope model, and
- no secondary pumps.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.DHC.Loads.BaseClasses.BuildingSpawnZ1 | bui | Building | |
| Buildings.Fluid.Sources.MassFlowSource_T | supHeaWat | Heating water supply | |
| Modelica.Blocks.Sources.RealExpression | THeaWatSup | Heating water supply temperature | |
| Modelica.Blocks.Sources.RealExpression | mHeaWat_flow | Heating water flow rate | |
| Buildings.Fluid.Sources.MassFlowSource_T | supChiWat | Chilled water supply | |
| Modelica.Blocks.Sources.RealExpression | TChiWatSup | Chilled water supply temperature | |
| Modelica.Blocks.Sources.RealExpression | mChiWat_flow | Chilled water flow rate | |
| Buildings.Fluid.Sources.Boundary_pT | sinHeaWat | Sink for heating water | |
| Buildings.Fluid.Sources.Boundary_pT | sinChiWat | Sink for chilled water |
Contents
| Name | Description |
|---|---|
 Medium1 | Source side medium |
Revisions
-
February 21, 2020, by Antoine Gautier:
First implementation.