modelIdealShell_L2
Extends from ClaRa.Basics.ControlVolumes.FluidVolumes.VolumeVLE_L2 (A lumped control volume for vapour/liquid equilibrium), ClaRa.Basics.Icons.HEX02, ClaRa.Basics.Icons.ComplexityLevel (Displays the complexity level inside model icon ).
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.VLEFluid.Types.BaseVLEFluid | medium (from VolumeVLE_L2) | simCenter.fluid1 | Medium in the component |
| Initialisation | |||
| Boolean | useHomotopy (from VolumeVLE_L2) | simCenter.useHomotopy | True, if homotopy method is used during initialisation |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_start (from VolumeVLE_L2) | 1e5 | Start value of system specific enthalpy |
| ClaRa.Basics.Units.Pressure | p_start (from VolumeVLE_L2) | 1e5 | Start value of system pressure |
| ClaRa.Basics.Units.MassFraction[medium.nc - 1] | xi_start (from VolumeVLE_L2) | medium.xi_default | Start value for mass fraction |
| Integer | initOption (from VolumeVLE_L2) | 0 | Type of initialisation |
| General › Nominal Values | |||
| ClaRa.Basics.Units.MassFlowRate | m_flow_nom (from VolumeVLE_L2) | 10 | Nominal mass flow rates at inlet |
| Nominal Values | |||
| ClaRa.Basics.Units.Pressure | p_nom (from VolumeVLE_L2) | 1e5 | Nominal pressure |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_nom (from VolumeVLE_L2) | 1e5 | Nominal specific enthalpy |
| ClaRa.Basics.Units.MassFraction[medium.nc - 1] | xi_nom (from VolumeVLE_L2) | medium.xi_default | Nominal mass fraction |
| Summary and Visualisation | |||
| Boolean | showExpertSummary (from VolumeVLE_L2) | simCenter.showExpertSummary | True, if expert summary should be applied |
| Boolean | showData | true | True, if a data port containing p,T,h,s,m_flow shall be shown, else false |
| Boolean | contributeToCycleSummary | simCenter.contributeToCycleSummary | True if component shall contribute to automatic efficiency calculation |
| Boolean | heatFlowIsLoss | true | True if heat flow is a loss (not a process product) |
| Geometry | |||
| Integer | heatSurfaceAlloc (from VolumeVLE_L2) | 1 | Heat transfer area to be considered |
| Modelica.Units.SI.Length | height | 1 | Height of the component |
| Modelica.Units.SI.Length | width | 1 | Width of the component |
| Modelica.Units.SI.Length | length | 1 | Length of the component |
| Modelica.Units.SI.Length | diameter_t | 0.1 | Outer diameter of internal tubes |
| Integer | N_tubes | 1 | Number of internal tubes |
| Integer | N_passes | 1 | Number of passes of the internal tubes |
| ClaRa.Basics.Choices.GeometryOrientation | flowOrientation | ClaRa.Basics.Choices.GeometryOrientation.horizontal | Flow orientation at shell side |
| Integer | tubeOrientation | 0 | Tube orientation |
| Modelica.Units.SI.Length | z_in | height/2 | Inlet position from bottom |
| Modelica.Units.SI.Length | z_out | height/2 | Outlet position from bottom |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Interfaces.FluidPortIn | inlet (from VolumeVLE_L2) | Inlet port | |
| ClaRa.Basics.Interfaces.FluidPortOut | outlet (from VolumeVLE_L2) | Outlet port | |
| ClaRa.Basics.Interfaces.HeatPort_a | heat (from VolumeVLE_L2) | ||
| ClaRa.Basics.Interfaces.EyeOut | eye |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| String | complexity (from ComplexityLevel) | "??" | |
| ClaRa.SimCenter | simCenter (from VolumeVLE_L2) | ||
| ClaRa.Basics.Units.Mass | mass (from VolumeVLE_L2) | Total system mass | |
| ClaRa.Basics.Units.Pressure | p (from VolumeVLE_L2) | System pressure | |
| Summary | summary (from VolumeVLE_L2) | ||
| TILMedia.VLEFluid.MixtureCompatible.VLEFluid_ph | fluidIn (from VolumeVLE_L2) | ||
| TILMedia.VLEFluid.MixtureCompatible.VLEFluid_ph | fluidOut (from VolumeVLE_L2) | ||
| HeatTransfer | heattransfer (from VolumeVLE_L2) | ||
| Geometry | geo (from VolumeVLE_L2) | ||
| PhaseBorder | phaseBorder (from VolumeVLE_L2) | ||
| PressureLoss | pressureLoss (from VolumeVLE_L2) | ||
| ClaRa.Basics.Interfaces.Connected2SimCenter | connected2SimCenter |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.