Model for P/tan(Phi) HVDC link with a PQ diagram and with terminal2 connected to a switched-off bus This HVDC link regulates the active power flowing through itself and the reactive power at terminal1. The power factor setpoint is given as an input and can be modified during the simulation, as well as the active power setpoint. The terminal2 is connected to a switched-off bus. The reactive power limits are given by a PQ diagram.
Generated at 2025-03-09T19:25:01Z
by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos
.Dynawo.Electrical.HVDC.HvdcPTanPhi.HvdcPTanPhiDanglingDiagramPQ