blockDeadZone
Dead zone, bypassed if the limits are equal
Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).
Information
The DeadZone block defines a region of zero output.
If the input is within uMin ... uMax, the output is zero. Outside of this zone, the output is a linear function of the input with a slope of 1.
If uMax = uMin, the block is bypassed i.e. the output is equal to the input.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | uMax | Upper limit of dead zone | |
| Real | uMin | -uMax | Lower limit of dead zone |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u (from SISO) | Connector of Real input signal | |
| RealOutput | y (from SISO) | Connector of Real output signal |