modelVariableLimiter
Limit the range of a signal with variable limits
Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).
Information
The Limiter block passes its input signal as output signal as long as the input is within the upper and lower limits specified by the two additional inputs limit1 and limit2. If this is not the case, the corresponding limit is passed as output.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u (from SISO) | Connector of Real input signal | |
| RealOutput | y (from SISO) | Connector of Real output signal | |
| Modelica.Blocks.Interfaces.RealInput | limit1 | Connector of Real input signal used as maximum of input u | |
| Modelica.Blocks.Interfaces.RealInput | limit2 | Connector of Real input signal used as minimum of input u |