| Ports links |
| Boolean | useElevDifference (from TwoFluidPorts) | true | introduces, or not, an equation for the ports elevation. Use only in one connector |
| FreeFluids.Types.ElevationOption | elevCalcMethod (from TwoFluidPorts) | FreeFluids.Types.ElevationOption.differential | if useElevDifference==true, selects the equation to use: differential, or absolute for PortB |
| Modelica.Units.SI.Length | elevDifference (from TwoFluidPorts) | 0.0 | used only if previously selected. Positive if PortB higher than PortA |
| Modelica.Units.SI.Length | portBelevation (from TwoFluidPorts) | 0.0 | used only if previously selected. |
| Boolean | calcEnthalpyDifference (from TwoFluidPorts) | true | if true, will calculate the enthalpy difference between ports. Use only in one connector |
| Boolean | passComposition (from TwoFluidPorts) | true | if true, the equation PortA.X=PortB.X will be activated |
| Flow |
| FreeFluids.Types.ValveFixOption | fix (from ValveBase) | FreeFluids.Types.ValveFixOption.fixKv | select the value to fix: Kv, pressure drop, or flow |
| Modelica.Units.SI.Area | fixedKv (from ValveBase) | 1.0 | Kv value if it is fixed |
| Modelica.Units.SI.PressureDifference | fixedDP (from ValveBase) | -0.5e5 | negative if PortB.P<PortA.P |
| Modelica.Units.SI.MassFlowRate | fixedFlow (from ValveBase) | 1.0 | fixed mass flow to maintain at Port A. Possitive if flow is in |
