.IBPSA.Fluid.Movers.Validation

Information

This package contains validation models for the classes in IBPSA.Fluid.Movers.

Note that most validation models contain simple input data which may not be realistic, but for which the correct output can be obtained through an analytic solution. The examples plot various outputs, which have been verified against these solutions. These model outputs are stored as reference data and used for continuous validation whenever models in the library change.

Contents

Name	Description
ControlledFlowMachine	Fans with different control signals as input
ControlledFlowMachineDynamic	Fans with different control signals as input and a dynamic speed signal
FlowControlled_dp	Fan with zero mass flow rate and head as input
FlowControlled_dpSystem	Demonstration of the use of prescribedPressure
FlowControlled_m_flow	Fan with zero mass flow rate and mass flow rate as input
PowerExact	Power calculation comparison among three mover types, using exact power computation for m_flow and dp
PowerSimplified	Power calculation comparison among three mover types, using simplified power computation for m_flow and dp
PumpCurveConstruction	Validation model that tests that the pump curve is properly extrapolated to V=0 and dp=0
PumpCurveDerivatives	Check for monotoneously increasing pump curve relations between Nrpm, dp and m_flow
Pump_Nrpm_stratos	Model validation using a Wilo Stratos 80/1-12 pump
Pump_stratos	Stratos pumps with speed as input
SpeedControlled_Nrpm	Fan with zero mass flow rate and speed as input
SpeedControlled_y	Fan with zero mass flow rate and control signal y as input
SpeedControlled_y_linear	Pump with linear characteristic for pressure vs. flow rate
BaseClasses	Package with base classes for IBPSA.Fluid.Movers.Validation