modelCylinder
Cylinder with rod and crank of a combustion engine
Information
Cylinder with rod and crank of a combustion engine. Used as submodel in Loops.EngineV6.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | animation | true | = true, if animation shall be enabled |
| SI.Length | cylinderTopPosition | 0.42 | Length from crank shaft to end of cylinder. |
| SI.Length | pistonLength | 0.1 | Length of cylinder |
| SI.Length | rodLength | 0.2 | Length of rod |
| SI.Length | crankLength | 0.2 | Length of crank shaft in x direction |
| SI.Length | crankPinOffset | 0.1 | Offset of crank pin from center axis |
| SI.Length | crankPinLength | 0.1 | Offset of crank pin from center axis |
| SI.Angle | cylinderInclinationAngle | 0 | Inclination of cylinder |
| SI.Angle | crankAngleOffset | 0 | Offset for crank angle |
| SI.Length | cylinderLength | cylinderTopPosition - (pistonLength + rodLength - crankPinOffset) | Maximum length of cylinder volume |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.Frame_a | cylinder_a | ||
| Interfaces.Frame_a | cylinder_b | ||
| Interfaces.Frame_a | crank_a | ||
| Interfaces.Frame_a | crank_b |