modelPartialTwoFramesAndHeat
Partial model with two frames and HeatPort
Extends from PlanarMechanics.Interfaces.PartialTwoFrames (Partial model with two frames), Modelica.Thermal.HeatTransfer.Interfaces.PartialElementaryConditionalHeatPortWithoutT (Partial model to include a conditional HeatPort in order to dissipate losses, used for textual modeling, i.e., for elementary models).
Information
The gear interface partial model is a model that has all the interfaces of each planar gear connection. Each planar gear model should be extended from this base level model.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | useHeatPort (from PartialElementaryConditionalHeatPortWithoutT) | false | = true, if heatPort is enabled |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Frame_a | frame_a (from PartialTwoFrames) | Coordinate system fixed to the component with one cut-force and cut-torque | |
| Frame_b | frame_b (from PartialTwoFrames) | Coordinate system fixed to the component with one cut-force and cut-torque | |
| HeatTransfer.Interfaces.HeatPort_a | heatPort (from PartialElementaryConditionalHeatPortWithoutT) | Optional port to which dissipated losses are transported in form of heat |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Power | lossPower (from PartialElementaryConditionalHeatPortWithoutT) | Loss power leaving component via heatPort (> 0, if heat is flowing out of component) |
Revisions
Developed 2010 at the DLR Institute of System Dynamics and Control