Extends from PartialModels.myPartialTransformer (Partial model for transformers).
A transformer can be modeled as a dedicated Pi-network. A diagram of the model is shown in the figure.
| Type | Name | Default | Description |
|---|---|---|---|
| Types.myVoltage | UNomA (from myPartialTransformer) | Reference voltage at primary side | |
| Types.myVoltage | UNomB (from myPartialTransformer) | Reference voltage at secondary side | |
| Types.myAngle | theta (from myPartialTransformer) | 0 | Fixed phase shift |
| Types.myResistance | R (from myPartialTransformer) | Series resistance at primary side | |
| Types.myReactance | X (from myPartialTransformer) | 0 | Series reactance at primary side |
| Types.myConductance | G (from myPartialTransformer) | 0 | Shunt conductance at primary side |
| Types.mySusceptance | B (from myPartialTransformer) | 0 | Shunt susceptance at primary side |
| Types.myApparentPowerMVA | SNom (from myPartialTransformer) | 0 | Nominal power of the transformer. 0 means no control |
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.myAcausalTerminal | terminalA (from myPartialTransformer) | Terminal A of the node | |
| Interfaces.myAcausalTerminal | terminalB (from myPartialTransformer) | Terminal B of the node |
| Type | Name | Default | Description |
|---|---|---|---|
| Types.myCurrent | IA (from myPartialTransformer) | CM.abs(terminalA.i) | Current flowing port A |
| Types.myVoltage | UA (from myPartialTransformer) | sqrt(3)*CM.abs(terminalA.v) | Voltage at port A |
| Types.myCurrent | IB (from myPartialTransformer) | CM.abs(terminalB.i) | Current flowing port B |
| Types.myVoltage | UB (from myPartialTransformer) | sqrt(3)*CM.abs(terminalB.v) | Voltage at port B |
| Types.myApparentPower | S (from myPartialTransformer) | sqrt(3)*IA*UA | Apparent power flowing port A |
