modelImpedNonSymHeat
Impedance base non symmetric with heat port, 3-phase dqo
Extends from ImpedNonSymBase (Impedance base non symmetric, 3-phase dqo.), Base.Interfaces.AddHeatV (Additional vector heat port).
Information
Same as ImpedNonSymBase, but contains an additional vector heat port.
Does not contain mass and specific heat. These parameters are expected to belong to the corresponding thermal model. The heat-flow at the connectors is given by the dissipated electric power per conductor.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | stIni_en (from ImpedBase) | true | enable steady-state initial equation |
| Integer | m_heat (from AddHeatV) | 1 | number of heat conductors |
| Nominal | |||
| Base.Types.Units | units (from Nominal) | Types.pu | SI | pu |
| SI.Voltage | V_nom (from Nominal) | 1 | nom Voltage (= base if pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nom Power (= base if pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nom frequency |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Base.Interfaces.ACdqo_p | term_p (from Port_p_n) | positive terminal | |
| Base.Interfaces.ACdqo_n | term_n (from Port_p_n) | negative terminal | |
| Base.Interfaces.ThermalV_n | heat (from AddHeatV) | vector heat port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v (from ImpedBase) | ||
| SI.Current | i (from ImpedBase) | ||
| Modelica.SIunits.Conversions.NonSIunits.Temperature_degC | T (from AddHeatV) | Temperature of heat conductors | |
| SI.HeatFlowRate | Q_flow (from AddHeatV) | Dissipated heat of conductors | |
| SI.Voltage | v_abc | Park*v | |
| SI.Current | i_abc | Park*i |