modelImpedYDHeat
One terminal impedance base with heat port, 3-phase dqo
Extends from ImpedYDBase (One terminal impedance base, 3-phase dqo), Base.Interfaces.AddHeat (Additional heat port).
Information
Same as ImpedYDBase, but contains an additional heat port.
Does not contain mass and specific heat. These parameters are expected to belong to the corresponding thermal model. The heat-flow at the connector is given by the total dissipated electric energy of all conductors (not included neutral-to-ground!).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | stIni_en (from ImpedYDBase) | true | enable steady-state initial equation |
| SIpu.Resistance | r_n (from ImpedYDBase) | 1 | resistance neutral to grd |
| Nominal | |||
| Base.Types.Units | units (from Nominal) | Types.pu | SI | pu |
| SI.Voltage | V_nom (from Nominal) | 1 | nom Voltage (= base if pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nom Power (= base if pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nom frequency |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Base.Interfaces.ACdqo_p | term (from Port_p) | positive terminal | |
| Base.Interfaces.Thermal_n | heat (from AddHeat) | heat port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Topology.Y | top (from YDport_p) | Y or Delta topology | |
| SI.Voltage | v (from YDport_p) | top.v_cond | voltage conductor |
| SI.Current | i (from YDport_p) | top.i_cond | current conductor |
| SI.Voltage | v_n (from YDport_p) | top.v_n | voltage neutral |
| SI.Current | i_n (from YDport_p) | top.i_n | current neutral to ground |
| Modelica.SIunits.Conversions.NonSIunits.Temperature_degC | T (from AddHeat) | Temperature of conductor | |
| SI.HeatFlowRate | Q_flow (from AddHeat) | Dissipated heat of conductor |