.SpotExamples.a_Introduction.Units

Information

This example shows, how input-parameters can be defined in SI- or in pu-units (V, A or 'per unit').
'SI | pu' means 'SI' or 'pu', depending on the choice of 'units'.

  SI:     base-values = 1
  pu:     base-values = nominal-values (by definition)

Upper part:
input for 'voltage_SI', 'meter_SI' and 'load_SI' in V, VA, and Ohm.

  V_base = 1,     V_nom = 400 V
  S_base = 1,     S_nom = 10 kVA
  R_base = 1

  V_base = V_nom = 400 V
  S_base = S_nom = 10 kVA
  R_base = V_base^2/S_base = 16 Ohm

  408 V   and  1.02 pu
  20 Ohm  and  1.25 pu

See for example:

  meter_SI.p[1] = 8323.2 W   (active power in SI)
  meter_pu.p[1] = 0.83232 pu (active power in pu)

up users guide