modelDittusBoelter
Dittus-Boelter heat transfer correlation
Extends from BaseClasses.DistributedHeatTransferFV (Base class for distributed heat transfer models - finite volumes).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | useAverageTemperature (from DistributedHeatTransferFV) | true | = true to use average temperature for heat transfer |
| SI.Length | l (from DistributedHeatTransferFV) | L/(Nw) | Length of a single volume |
| SI.PerUnit | kc (from DistributedHeatTransferFV) | 1 | Correction factor for heat transfer |
| Boolean | heating | true | true if fluid is heated, false if fluid is cooled |
| Real | Re_min | 10000 | Minimum Reynolds number |
| Real | Pr_min | 0.7 | Minimum Prandtl number |
| Real | Pr_max | 160 | Maximum Prandtl number |
| Set by Flow1D model | |||
| Integer | Nf (from DistributedHeatTransferFV) | 2 | Number of nodes on the fluid side |
| Integer | Nw (from DistributedHeatTransferFV) | Nf - 1 | Number of volumes on the wall side |
| Integer | Nt (from DistributedHeatTransferFV) | Number of tubes in parallel | |
| SI.Distance | L (from DistributedHeatTransferFV) | Tube length | |
| SI.Area | A (from DistributedHeatTransferFV) | Cross-sectional area (single tube) | |
| SI.Length | omega (from DistributedHeatTransferFV) | Wet perimeter of heat transfer surface (single tube) | |
| SI.Length | Dhyd (from DistributedHeatTransferFV) | Hydraulic Diameter (single tube) | |
| SI.MassFlowRate | wnom (from DistributedHeatTransferFV) | Nominal mass flow rate (single tube) | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ThermoPower.Thermal.DHTVolumes | wall (from DistributedHeatTransferFV) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Medium.ThermodynamicState[Nf] | fluidState (from DistributedHeatTransferFV) | ||
| Medium.MassFlowRate[Nf] | w (from DistributedHeatTransferFV) | ||
| Medium.Temperature[Nf] | T (from DistributedHeatTransferFV) | Temperatures at the fluid side nodes | |
| Medium.Temperature[Nw] | Tw (from DistributedHeatTransferFV) | Temperatures of the wall volumes | |
| SI.Power[Nw] | Qw (from DistributedHeatTransferFV) | Heat flows entering from the wall volumes | |
| SI.Power[Nf - 1] | Qvol (from DistributedHeatTransferFV) | Qw | Heat flows going to the fluid volumes |
| SI.Power | Q (from DistributedHeatTransferFV) | Total heat flow through lateral boundary | |
| SI.CoefficientOfHeatTransfer[Nf] | gamma | Heat transfer coefficients at the nodes | |
| SI.CoefficientOfHeatTransfer[Nw] | gamma_vol | Heat transfer coefficients at the volumes | |
| Medium.Temperature[Nw] | Tvol | Fluid temperature in the volumes | |
| Medium.DynamicViscosity[Nf] | mu | Dynamic viscosity | |
| Medium.ThermalConductivity[Nf] | k | Thermal conductivity | |
| Medium.SpecificHeatCapacity[Nf] | cp | Heat capacity at constant pressure | |
| SI.PerUnit[Nf] | Re | Reynolds number | |
| SI.PerUnit[Nf] | Pr | Prandtl numbers | |
| SI.PerUnit[Nf] | Re_l | Reynolds number limited to validity range | |
| SI.PerUnit[Nf] | Pr_l | Prandtl number limited to validity range |