modelTestGasStorage_constXi_L2
Extends from TransiEnt.Basics.Icons.Checkmodel (Icon for check models).
Information
1. Purpose of model
(no remarks)
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
(no remarks)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Carsten Bode (c.bode@tuhh.de) in Sep 2016
Model revised by Carsten Bode (c.bode@tuhh.de) in Apr 2018 (changes due to ClaRa changes: exchanged wall models)
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Media.Gases.VLE_VDIWA_H2 | medium | ||
| Modelica.Units.SI.SpecificHeatCapacity | cp_steel316 | 468 | Heat capacity of steel 316 (station tank and pipes) |
| Modelica.Units.SI.ThermodynamicTemperature | T_start_1 | 300.15 | Start temperature in pipe_54, at outlet of pipe_32, pipe_32 and its wall, station_tank and its wall |
| Modelica.Units.SI.ThermodynamicTemperature | T_start_2 | 286.64 | Start temperature in vehicle_tank and its wall |
| Modelica.Units.SI.Pressure | p_start_1 | 415.41e5 | Start pressure in pipe_54, station_tank |
| Modelica.Units.SI.Pressure | p_start_2 | 138.01e5 | Start pressure in vehicle_tank, pipe_32 |
| Modelica.Units.SI.SpecificEnthalpy | h_start_1 | TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_pTxi(vleFluidType = medium, p = p_start_1, T = T_start_1) | Start enthalpy for pipe_54 |
| Modelica.Units.SI.SpecificEnthalpy | h_start_2 | TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_pTxi(vleFluidType = medium, p = p_start_2, T = T_start_1) | Start enthalpy for pipe_32 and its outlet |