Connectors and partial ASM1 models for Secondary Clarifier Model by OtterpohlThis package contains connectors and interfaces (partial models) for
the ASM1 secondary clarifier model based on Otterpohl [1] (two settling velocities for
distinction between micro and macro flocs and omega correction function).
References:
[1] R. Otterpohl and M. Freund: Dynamic models for clarifiers of activated sludge plants
with dry and wet weather flows. Water Science and Technology. 26 (1992), pp 1391-1400.
Main Author:
Gerald Reichl
Technische Universitaet Ilmenau
Faculty of Informatics and Automation
Department Dynamics and Simulation of ecological Systems
P.O. Box 10 05 65
98684 Ilmenau
Germany
This package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying
disclaimer in the documentation of package Modelica in file "Modelica/package.mo".
Copyright (C) 2003, Gerald Reichl
Contents
| Name | Description |
|---|
| UpperLayerPin | Connector above influent layer |
| LowerLayerPin | Connector below influent layer |
| SCParam | partial model providing clarifier parameters |
| SCVar | partial models providing variables |
| ratios | partial model for ratios of solid components |
| vSfun | Sedimentation velocity function |
| omega | Omega correction function by Haertel |
Generated at 2025-12-12T19:14:01Z
by OpenModelicaOpenModelica 1.25.7 using GenerateDoc.mos