This model demonstrates the use of
The valve on the water-side is regulated to track a setpoint temperature
for the air outlet.
|Medium1||Medium model for water|
|Medium2||Medium model for air|
December 22, 2014 by Michael Wetter:
to address issue
July 3, 2014, by Michael Wetter:
Changed pressure sink to mass flow rate sink to avoid an overdetermined
by consistent set of initial conditions.
March 1, 2013, by Michael Wetter:
Added nominal pressure drop for valve as
this parameter no longer has a default value.
Generated at 2023-09-21T00:33:23Z
by OpenModelicaOpenModelica 1.22.0~dev-51-ge506fbc using GenerateDoc.mos