modelWPPQControl2020
Reactive power control module for wind power plants (IEC N°61400-27-1:2020)
Extends from Dynawo.Electrical.Controls.IEC.IEC61400.BaseClasses.BaseWPPQControl (Reactive power control base module for wind power plants (IEC N°61400-27-1)), Dynawo.Electrical.Controls.IEC.IEC61400.Parameters.QControlParameters2020.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.ApparentPowerModule | SNom (from BaseWPPQControl) | Nominal converter apparent power in MVA | |
| Types.Time | tS (from BaseWPPQControl) | Integration time step in s | |
| QControlWP | |||
| Types.PerUnit | DXRefMaxPu (from BaseWPPQControl) | Maximum positive ramp rate for WT reactive power or voltage reference in pu/s (base SNom or UNom) (generator convention) | |
| Types.PerUnit | DXRefMinPu (from BaseWPPQControl) | Minimum negative ramp rate for WT reactive power or voltage reference in pu/s (base SNom or UNom) (generator convention) | |
| Types.PerUnit | Kiwpx (from BaseWPPQControl) | Reactive power or voltage PI controller integral gain in pu/s (base SNom) | |
| Types.PerUnit | Kpwpx (from BaseWPPQControl) | Reactive power or voltage PI controller proportional gain in pu (base SNom) | |
| Types.PerUnit | KwpqRef (from BaseWPPQControl) | Reactive power reference gain in pu (base SNom) | |
| Types.PerUnit | Kwpqu (from BaseWPPQControl) | Voltage controller cross coupling gain in pu (base SNom) | |
| Integer | MwpqMode (from BaseWPPQControl) | Control mode (0 : reactive power reference, 1 : power factor reference, 2 : UQ static, 3 : voltage control) | |
| Types.Time | tUqFilt (from BaseWPPQControl) | Time constant for the UQ static mode in s | |
| Types.VoltageModulePu | UwpqDipPu (from BaseWPPQControl) | Voltage threshold for UVRT detection in pu (base UNom) | |
| Types.PerUnit | XKiwpxMaxPu (from BaseWPPQControl) | Maximum WT reactive power or voltage reference from integration in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | XKiwpxMinPu (from BaseWPPQControl) | Minimum WT reactive power or voltage reference from integration in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | XRefMaxPu (from BaseWPPQControl) | Maximum WT reactive power or voltage reference in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | XRefMinPu (from BaseWPPQControl) | Minimum WT reactive power or voltage reference in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | RwpDropPu | Resistive component of voltage drop impedance in pu (base UNom, SNom) | |
| Types.VoltageModulePu | UwpqRisePu | Voltage threshold for OVRT detection in pu (base UNom) | |
| Types.PerUnit | XErrMaxPu | Maximum reactive power or voltage error input to PI controller in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | XErrMinPu | Minimum reactive power or voltage error input to PI controller in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | XwpDropPu | Inductive component of voltage drop impedance in pu (base UNom, SNom) | |
| Operating point | |||
| Types.ActivePowerPu | P0Pu (from BaseWPPQControl) | Initial active power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.ReactivePowerPu | Q0Pu (from BaseWPPQControl) | Initial reactive power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.VoltageModulePu | U0Pu (from BaseWPPQControl) | Initial voltage amplitude at grid terminal in pu (base UNom) | |
| Types.PerUnit | X0Pu (from BaseWPPQControl) | Initial reactive power or voltage reference at grid terminal in pu (base SNom or UNom) (generator convention) | |
| Types.PerUnit | XWT0Pu (from BaseWPPQControl) | Initial reactive power or voltage reference at grid terminal in pu (base SNom or UNom) (generator convention) | |
| QControlTables | |||
| Real | TableQwpMaxPwpFiltCom11 (from QControlParameters2020) | 0 | |
| Real | TableQwpMaxPwpFiltCom12 (from QControlParameters2020) | 0.33 | |
| Real | TableQwpMaxPwpFiltCom21 (from QControlParameters2020) | 0.5 | |
| Real | TableQwpMaxPwpFiltCom22 (from QControlParameters2020) | 0.33 | |
| Real | TableQwpMaxPwpFiltCom31 (from QControlParameters2020) | 1 | |
| Real | TableQwpMaxPwpFiltCom32 (from QControlParameters2020) | 0.33 | |
| Real[:,:] | TableQwpMaxPwpFiltCom (from QControlParameters2020) | [TableQwpMaxPwpFiltCom11, TableQwpMaxPwpFiltCom12; TableQwpMaxPwpFiltCom21, TableQwpMaxPwpFiltCom22; TableQwpMaxPwpFiltCom31, TableQwpMaxPwpFiltCom32] | Power dependent reactive power maximum limit |
| Real | TableQwpMinPwpFiltCom11 (from QControlParameters2020) | 0 | |
| Real | TableQwpMinPwpFiltCom12 (from QControlParameters2020) | -0.33 | |
| Real | TableQwpMinPwpFiltCom21 (from QControlParameters2020) | 0.5 | |
| Real | TableQwpMinPwpFiltCom22 (from QControlParameters2020) | -0.33 | |
| Real | TableQwpMinPwpFiltCom31 (from QControlParameters2020) | 1 | |
| Real | TableQwpMinPwpFiltCom32 (from QControlParameters2020) | -0.33 | |
| Real[:,:] | TableQwpMinPwpFiltCom (from QControlParameters2020) | [TableQwpMinPwpFiltCom11, TableQwpMinPwpFiltCom12; TableQwpMinPwpFiltCom21, TableQwpMinPwpFiltCom22; TableQwpMinPwpFiltCom31, TableQwpMinPwpFiltCom32] | Power dependent reactive power minimum limit |
| Real | TableQwpUErr11 (from QControlParameters2020) | -0.05 | |
| Real | TableQwpUErr12 (from QControlParameters2020) | 1.21 | |
| Real | TableQwpUErr21 (from QControlParameters2020) | 0 | |
| Real | TableQwpUErr22 (from QControlParameters2020) | 0.21 | |
| Real | TableQwpUErr31 (from QControlParameters2020) | 0.05 | |
| Real | TableQwpUErr32 (from QControlParameters2020) | -0.79 | |
| Real[:,:] | TableQwpUErr (from QControlParameters2020) | [TableQwpUErr11, TableQwpUErr12; TableQwpUErr21, TableQwpUErr22; TableQwpUErr31, TableQwpUErr32] | Table for the UQ static mode |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | PWPFiltComPu | Filtered active power communicated to WP in pu (base SNom) (generator convention) | |
| Modelica.Blocks.Interfaces.RealInput | QWPFiltComPu | Filtered reactive power communicated to WP in pu (base SNom) (generator convention) | |
| Modelica.Blocks.Interfaces.RealInput | UWPFiltComPu | Filtered voltage module communicated to WP in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealInput | xWPRefComPu | Reference reactive power or voltage communicated to WP in pu (base SNom or UNom) (generator convention) | |
| Modelica.Blocks.Interfaces.BooleanOutput | fWPFrt | True if fault status | |
| Modelica.Blocks.Interfaces.RealOutput | xPDRefPu | Reference reactive power or voltage communicated to WT in pu (base SNom or UNom) (generator convention) |