modelWPP4CurrentSource2020_INIT
Wind Power Plant Type 4 model from IEC 61400-27-1:2020 standard : initialization model
Extends from Dynawo.Electrical.Controls.IEC.IEC61400.Parameters.QControlParameters2020, Dynawo.Electrical.Wind.IEC.WPP.WPP4CurrentSource_INIT (Wind Power Plant Type 4 model from IEC 61400-27-1 standard : initialization model).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.ApparentPowerModule | SNom (from WT4CurrentSource_INIT) | Nominal converter apparent power in MVA | |
| Types.PerUnit | BesPu (from WT4CurrentSource_INIT) | if ConverterLVControl then 0 else BLvTrPu | Shunt susceptance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.PerUnit | GesPu (from WT4CurrentSource_INIT) | if ConverterLVControl then 0 else GLvTrPu | Shunt conductance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.PerUnit | ResPu (from WT4CurrentSource_INIT) | if ConverterLVControl then 0 else RLvTrPu | Serial resistance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.PerUnit | XesPu (from WT4CurrentSource_INIT) | if ConverterLVControl then 0 else XLvTrPu | Serial reactance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.CurrentModulePu | IMaxPu (from WT4CurrentSource_INIT) | Maximum current at converter terminal in pu (base UNom, SNom) | |
| Types.PerUnit | Kpqu (from WT4CurrentSource_INIT) | Partial derivative of reactive current limit against voltage in pu (base UNom, SNom) | |
| Types.VoltageModulePu | UpquMaxPu (from WT4CurrentSource_INIT) | WT voltage in the operation point where zero reactive power can be delivered, in pu (base UNom) | |
| Integer | MqG (from WT4CurrentSource_INIT) | General Q control mode (0-4): Voltage control (0), Reactive power control (1), Open loop reactive power control (2), Power factor control (3), Open loop power factor control (4) | |
| Types.PerUnit | RDropPu (from WT4CurrentSource_INIT) | Resistive component of voltage drop impedance in pu (base UNom, SNom) | |
| Types.VoltageModulePu | URef0Pu (from WT4CurrentSource_INIT) | User-defined bias in voltage reference in pu (base UNom) | |
| Types.PerUnit | XDropPu (from WT4CurrentSource_INIT) | Inductive component of voltage drop impedance in pu (base UNom, SNom) | |
| Boolean | QlConst (from WT4CurrentSource_INIT) | True if limits are constant | |
| Types.ReactivePowerPu | QMaxPu (from WT4CurrentSource_INIT) | Constant maximum reactive power at grid terminal in pu (base SNom) (generator convention) | |
| Types.ReactivePowerPu | QMinPu (from WT4CurrentSource_INIT) | Constant minimum reactive power at grid terminal in pu (base SNom) (generator convention) | |
| Types.ActivePowerPu | P0Pu (from WT4CurrentSource_INIT) | Initial active power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.ReactivePowerPu | Q0Pu (from WT4CurrentSource_INIT) | Initial reactive power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.VoltageModulePu | U0Pu (from WT4CurrentSource_INIT) | Initial voltage amplitude at grid terminal in pu (base UNom) | |
| Types.Angle | UPhase0 (from WT4CurrentSource_INIT) | Initial voltage angle at grid terminal in rad | |
| Types.PerUnit | BPcsPu (from WPP4CurrentSource_INIT) | if PPCLocal and ConverterLVControl then BLvTrPu + BMvHvPu elseif PPCLocal and not ConverterLVControl then BMvHvPu elseif not PPCLocal and ConverterLVControl then BLvTrPu else 0 | Shunt susceptance between WT terminal and model's output terminal in pu (base UNom, SNom) |
| Types.PerUnit | GPcsPu (from WPP4CurrentSource_INIT) | if PPCLocal and ConverterLVControl then GLvTrPu + GMvHvPu elseif PPCLocal and not ConverterLVControl then GMvHvPu elseif not PPCLocal and ConverterLVControl then GLvTrPu else 0 | Shunt conductance between WT terminal and model's output terminal in pu (base UNom, SNom) |
| Types.PerUnit | RPcsPu (from WPP4CurrentSource_INIT) | if PPCLocal and ConverterLVControl then RLvTrPu + RMvHvPu elseif PPCLocal and not ConverterLVControl then RMvHvPu elseif not PPCLocal and ConverterLVControl then RLvTrPu else 0 | Serial resistance between WT terminal and model's output terminal in pu (base UNom, SNom) |
| Types.PerUnit | XPcsPu (from WPP4CurrentSource_INIT) | if PPCLocal and ConverterLVControl then XLvTrPu + XMvHvPu elseif PPCLocal and not ConverterLVControl then XMvHvPu elseif not PPCLocal and ConverterLVControl then XLvTrPu else 0 | Serial reactance between WT terminal and model's output terminal in pu (base UNom, SNom) |
| Types.PerUnit | Kwpqu | Voltage controller cross coupling gain in pu (base SNom) | |
| Integer | MwpqMode | Control mode (0 : reactive power reference, 1 : power factor reference, 2 : UQ static, 3 : voltage control) | |
| Types.PerUnit | RwpDropPu | Resistive component of voltage drop impedance in pu (base UNom, SNom) | |
| Types.PerUnit | XwpDropPu | Inductive component of voltage drop impedance in pu (base UNom, SNom) | |
| QControlTables | |||
| Real | TableQwpMaxPwpFiltCom11 (from QControlParameters2020) | 0 | |
| Real | TableQwpMaxPwpFiltCom12 (from QControlParameters2020) | 0.33 | |
| Real | TableQwpMaxPwpFiltCom21 (from QControlParameters2020) | 0.5 | |
| Real | TableQwpMaxPwpFiltCom22 (from QControlParameters2020) | 0.33 | |
| Real | TableQwpMaxPwpFiltCom31 (from QControlParameters2020) | 1 | |
| Real | TableQwpMaxPwpFiltCom32 (from QControlParameters2020) | 0.33 | |
| Real[:,:] | TableQwpMaxPwpFiltCom (from QControlParameters2020) | [TableQwpMaxPwpFiltCom11, TableQwpMaxPwpFiltCom12; TableQwpMaxPwpFiltCom21, TableQwpMaxPwpFiltCom22; TableQwpMaxPwpFiltCom31, TableQwpMaxPwpFiltCom32] | Power dependent reactive power maximum limit |
| Real | TableQwpMinPwpFiltCom11 (from QControlParameters2020) | 0 | |
| Real | TableQwpMinPwpFiltCom12 (from QControlParameters2020) | -0.33 | |
| Real | TableQwpMinPwpFiltCom21 (from QControlParameters2020) | 0.5 | |
| Real | TableQwpMinPwpFiltCom22 (from QControlParameters2020) | -0.33 | |
| Real | TableQwpMinPwpFiltCom31 (from QControlParameters2020) | 1 | |
| Real | TableQwpMinPwpFiltCom32 (from QControlParameters2020) | -0.33 | |
| Real[:,:] | TableQwpMinPwpFiltCom (from QControlParameters2020) | [TableQwpMinPwpFiltCom11, TableQwpMinPwpFiltCom12; TableQwpMinPwpFiltCom21, TableQwpMinPwpFiltCom22; TableQwpMinPwpFiltCom31, TableQwpMinPwpFiltCom32] | Power dependent reactive power minimum limit |
| Real | TableQwpUErr11 (from QControlParameters2020) | -0.05 | |
| Real | TableQwpUErr12 (from QControlParameters2020) | 1.21 | |
| Real | TableQwpUErr21 (from QControlParameters2020) | 0 | |
| Real | TableQwpUErr22 (from QControlParameters2020) | 0.21 | |
| Real | TableQwpUErr31 (from QControlParameters2020) | 0.05 | |
| Real | TableQwpUErr32 (from QControlParameters2020) | -0.79 | |
| Real[:,:] | TableQwpUErr (from QControlParameters2020) | [TableQwpUErr11, TableQwpUErr12; TableQwpUErr21, TableQwpUErr22; TableQwpUErr31, TableQwpUErr32] | Table for the UQ static mode |
| QLimitTables | |||
| Real | TableQMaxUwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMaxUwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMaxUwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMaxUwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMaxUwtcFilt31 (from QLimitParameters) | 0.8 | |
| Real | TableQMaxUwtcFilt32 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxUwtcFilt41 (from QLimitParameters) | 1.2 | |
| Real | TableQMaxUwtcFilt42 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxUwtcFilt51 (from QLimitParameters) | 1.21 | |
| Real | TableQMaxUwtcFilt52 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxUwtcFilt61 (from QLimitParameters) | 1.22 | |
| Real | TableQMaxUwtcFilt62 (from QLimitParameters) | 0.33 | |
| Real[:,:] | TableQMaxUwtcFilt (from QLimitParameters) | [TableQMaxUwtcFilt11, TableQMaxUwtcFilt12; TableQMaxUwtcFilt21, TableQMaxUwtcFilt22; TableQMaxUwtcFilt31, TableQMaxUwtcFilt32; TableQMaxUwtcFilt41, TableQMaxUwtcFilt42; TableQMaxUwtcFilt51, TableQMaxUwtcFilt52; TableQMaxUwtcFilt61, TableQMaxUwtcFilt62] | Voltage dependency of reactive power maximum limit |
| Real | TableQMinUwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMinUwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMinUwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMinUwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMinUwtcFilt31 (from QLimitParameters) | 0.8 | |
| Real | TableQMinUwtcFilt32 (from QLimitParameters) | -0.33 | |
| Real | TableQMinUwtcFilt41 (from QLimitParameters) | 1.2 | |
| Real | TableQMinUwtcFilt42 (from QLimitParameters) | -0.33 | |
| Real[:,:] | TableQMinUwtcFilt (from QLimitParameters) | [TableQMinUwtcFilt11, TableQMinUwtcFilt12; TableQMinUwtcFilt21, TableQMinUwtcFilt22; TableQMinUwtcFilt31, TableQMinUwtcFilt32; TableQMinUwtcFilt41, TableQMinUwtcFilt42] | Voltage dependency of reactive power minimum limit |
| Real | TableQMaxPwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMaxPwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMaxPwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMaxPwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMaxPwtcFilt31 (from QLimitParameters) | 0.3 | |
| Real | TableQMaxPwtcFilt32 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxPwtcFilt41 (from QLimitParameters) | 1 | |
| Real | TableQMaxPwtcFilt42 (from QLimitParameters) | 0.33 | |
| Real[:,:] | TableQMaxPwtcFilt (from QLimitParameters) | [TableQMaxPwtcFilt11, TableQMaxPwtcFilt12; TableQMaxPwtcFilt21, TableQMaxPwtcFilt22; TableQMaxPwtcFilt31, TableQMaxPwtcFilt32; TableQMaxPwtcFilt41, TableQMaxPwtcFilt42] | Active power dependency of reactive power maximum limit |
| Real | TableQMinPwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMinPwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMinPwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMinPwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMinPwtcFilt31 (from QLimitParameters) | 0.3 | |
| Real | TableQMinPwtcFilt32 (from QLimitParameters) | -0.33 | |
| Real | TableQMinPwtcFilt41 (from QLimitParameters) | 1 | |
| Real | TableQMinPwtcFilt42 (from QLimitParameters) | -0.33 | |
| Real[:,:] | TableQMinPwtcFilt (from QLimitParameters) | [TableQMinPwtcFilt11, TableQMinPwtcFilt12; TableQMinPwtcFilt21, TableQMinPwtcFilt22; TableQMinPwtcFilt31, TableQMinPwtcFilt32; TableQMinPwtcFilt41, TableQMinPwtcFilt42] | Active power dependency of reactive power minimum limit |
| CurrentLimitTables | |||
| Real | TableIpMaxUwt11 (from CurrentLimitParameters) | 0 | |
| Real | TableIpMaxUwt12 (from CurrentLimitParameters) | 0 | |
| Real | TableIpMaxUwt21 (from CurrentLimitParameters) | 0.1 | |
| Real | TableIpMaxUwt22 (from CurrentLimitParameters) | 0 | |
| Real | TableIpMaxUwt31 (from CurrentLimitParameters) | 0.15 | |
| Real | TableIpMaxUwt32 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt41 (from CurrentLimitParameters) | 0.9 | |
| Real | TableIpMaxUwt42 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt51 (from CurrentLimitParameters) | 0.925 | |
| Real | TableIpMaxUwt52 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt61 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt62 (from CurrentLimitParameters) | 1.1 | |
| Real | TableIpMaxUwt71 (from CurrentLimitParameters) | 1.1 | |
| Real | TableIpMaxUwt72 (from CurrentLimitParameters) | 1.1 | |
| Real[:,:] | TableIpMaxUwt (from CurrentLimitParameters) | [TableIpMaxUwt11, TableIpMaxUwt12; TableIpMaxUwt21, TableIpMaxUwt22; TableIpMaxUwt31, TableIpMaxUwt32; TableIpMaxUwt41, TableIpMaxUwt42; TableIpMaxUwt51, TableIpMaxUwt52; TableIpMaxUwt61, TableIpMaxUwt62; TableIpMaxUwt71, TableIpMaxUwt72] | Voltage dependency of active current limits |
| Real | TableIqMaxUwt11 (from CurrentLimitParameters) | 0 | |
| Real | TableIqMaxUwt12 (from CurrentLimitParameters) | 0 | |
| Real | TableIqMaxUwt21 (from CurrentLimitParameters) | 0.1 | |
| Real | TableIqMaxUwt22 (from CurrentLimitParameters) | 0 | |
| Real | TableIqMaxUwt31 (from CurrentLimitParameters) | 0.15 | |
| Real | TableIqMaxUwt32 (from CurrentLimitParameters) | 1 | |
| Real | TableIqMaxUwt41 (from CurrentLimitParameters) | 0.9 | |
| Real | TableIqMaxUwt42 (from CurrentLimitParameters) | 1 | |
| Real | TableIqMaxUwt51 (from CurrentLimitParameters) | 0.925 | |
| Real | TableIqMaxUwt52 (from CurrentLimitParameters) | 0.33 | |
| Real | TableIqMaxUwt61 (from CurrentLimitParameters) | 1.075 | |
| Real | TableIqMaxUwt62 (from CurrentLimitParameters) | 0.33 | |
| Real | TableIqMaxUwt71 (from CurrentLimitParameters) | 1.1 | |
| Real | TableIqMaxUwt72 (from CurrentLimitParameters) | 1 | |
| Real | TableIqMaxUwt81 (from CurrentLimitParameters) | 1.1001 | |
| Real | TableIqMaxUwt82 (from CurrentLimitParameters) | 1 | |
| Real[:,:] | TableIqMaxUwt (from CurrentLimitParameters) | [TableIqMaxUwt11, TableIqMaxUwt12; TableIqMaxUwt21, TableIqMaxUwt22; TableIqMaxUwt31, TableIqMaxUwt32; TableIqMaxUwt41, TableIqMaxUwt42; TableIqMaxUwt51, TableIqMaxUwt52; TableIqMaxUwt61, TableIqMaxUwt62; TableIqMaxUwt71, TableIqMaxUwt72; TableIqMaxUwt81, TableIqMaxUwt82] | Voltage dependency of reactive current limits |
| LV transformer | |||
| Types.PerUnit | BLvTrPu (from WT4CurrentSource_INIT) | Shunt susceptance of LV transformer in pu (base UNom, SNom) | |
| Types.PerUnit | GLvTrPu (from WT4CurrentSource_INIT) | Shunt conductance of LV transformer in pu (base UNom, SNom) | |
| Types.PerUnit | RLvTrPu (from WT4CurrentSource_INIT) | Serial resistance of LV transformer in pu (base UNom, SNom) | |
| Types.PerUnit | XLvTrPu (from WT4CurrentSource_INIT) | Serial reactance of LV transformer in pu (base UNom, SNom) | |
| Boolean | ConverterLVControl (from WT4CurrentSource_INIT) | If true, the converter is controlling at its output (LV side of its transformer), if false, after its transformer (MV side) | |
| MV network + MV/HV transformer | |||
| Types.PerUnit | BMvHvPu (from WPP4CurrentSource_INIT) | 0 | Shunt susceptance of internal MV network + MV/HV transformer in pu (base UNom, SNom) |
| Types.PerUnit | GMvHvPu (from WPP4CurrentSource_INIT) | 0 | Shunt conductance of internal MV network + MV/HV transformer in pu (base UNom, SNom) |
| Types.PerUnit | RMvHvPu (from WPP4CurrentSource_INIT) | 0 | Serial resistance of internal MV network + MV/HV transformer in pu (base UNom, SNom) |
| Types.PerUnit | XMvHvPu (from WPP4CurrentSource_INIT) | 0 | Serial reactance of internal MV network + MV/HV transformer in pu (base UNom, SNom) |
| Boolean | PPCLocal (from WPP4CurrentSource_INIT) | If true, the Power Park Control is controlling at model's output terminal, if false, at a remote terminal using external measurements | |
| Operating point | |||
| Types.ActivePowerPu | PPcc0Pu (from WPP4CurrentSource_INIT) | 0 | Initial active power at the external bus controlled by the PPC (used when PPCLocal = false) in pu (base SnRef) (receptor convention) (only if the PCS is defined outside of the model) |
| Types.ReactivePowerPu | QPcc0Pu (from WPP4CurrentSource_INIT) | 0 | Initial reactive power at the external bus controlled by the PPC (used when PPCLocal = false) in pu (base SnRef) (receptor convention) (only if the PCS is defined outside of the model) |
| Types.VoltageModulePu | UPcc0Pu (from WPP4CurrentSource_INIT) | 1 | Initial voltage module at the external bus controlled by the PPC (used when PPCLocal = false) in pu (base UNom) (only if the PCS is defined outside of the model) |
| Types.Angle | UPccPhase0 (from WPP4CurrentSource_INIT) | 0 | Initial voltage angle at the external bus controlled by the PPC (used when PPCLocal = false) in rad (only if the PCS is defined outside of the model) |