modelImpedBaseHeat
Impedance base with heat port, 1-phase
Extends from ImpedBase (Impedance base, 1-phase), Base.Interfaces.AddHeat (Additional heat port).
Information
Same as ImpedBase, but contains an additional heat port.
Does not contain mass and specific heat. These parameters are expected to belong to the corresponding thermal model. The heat-flow at the connector is given by the total dissipated electric power of both conductors.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Nominal | |||
| Base.Types.Units | units (from Nominal) | Types.pu | SI | pu |
| SI.Voltage | V_nom (from Nominal) | 1 | nom Voltage (= base if pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nom Power (= base if pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nom frequency |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Base.Interfaces.ElectricV_p | term_p (from Port_p_n) | positive terminal | |
| Base.Interfaces.ElectricV_n | term_n (from Port_p_n) | negative terminal | |
| Base.Interfaces.Thermal_n | heat (from AddHeat) | heat port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v (from ImpedBase) | ||
| SI.Current | i (from ImpedBase) | ||
| Modelica.SIunits.Conversions.NonSIunits.Temperature_degC | T (from AddHeat) | Temperature of conductor | |
| SI.HeatFlowRate | Q_flow (from AddHeat) | Dissipated heat of conductor |