modelRXline0
RX line without length parameter, 3-phase dqo
Extends from Impedances.Partials.ImpedBase (Impedance base, 3-phase dqo).
Information
This component contains the same equations as 'Impedances.Inductor', but it is specified using the parameters x and x0 instead of xs and xm (see info package 'Impedances'), similar to 'RXline'. It does not contain the length parameter 'len'. Together with 'Sources.InfBus' it may be used to model a network specified by voltage and impedance values.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | stIni_en (from ImpedBase) | true | enable steady-state initial equation |
| SIpu.Resistance | r | 0.01 | resistance |
| SIpu.Reactance | x | 0.1 | reactance |
| SIpu.Reactance | x0 | 3*x | reactance zero-comp |
| Nominal | |||
| Base.Types.Units | units (from Nominal) | Types.pu | SI | pu |
| SI.Voltage | V_nom (from Nominal) | 1 | nom Voltage (= base if pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nom Power (= base if pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nom frequency |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Base.Interfaces.ACdqo_p | term_p (from Port_p_n) | positive terminal | |
| Base.Interfaces.ACdqo_n | term_n (from Port_p_n) | negative terminal |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v (from ImpedBase) | ||
| SI.Current | i (from ImpedBase) |