modelGarbage
Preconfigured garbage furnification plant
Extends from TransiEnt.Producer.Electrical.Conventional.Components.NonlinearThreeStatePlant (Slew Rate limited (=nonlinear), Minimum power limited (shuts down below minimum power), with primary and secondary balancing controller where secondary balancing power is lumped inside).
Information
1. Purpose of model
Gas turbine model with startup time and setpoint limits.
Preconfigured garbage furnification plant.
2. Level of detail, physical effects considered, and physical insight
Level of Detail depends on the used component models
The model is a composition of a turbine model, an inertia model, a generator model with excitation system model and a primary controller.
See base class TransiEnt.Producer.Electrical.Conventional.Components.NonlinearThreeStatePlant for more information
3. Limits of validity
(no remarks)
4. Interfaces
P_el_set: input for electric power in [W] (setpoint for electric power)
P_SB_set: input for electric power in [W] (secondary balancing setpoint)
epp: active power port (choice of power port)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
Only one model of the base class needs to be checked
9. References
(no remarks)
10. Version History
Model created by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nSubgrids (from PartialElectricPowerPlant) | simCenter.iDetailedGrid | For calculation of statistics in subgrids (=1 local grid, e.g. hamburg, =2 surrounding grid, e.g. UCTE grid |
| Modelica.Units.SI.Power | P_min (from NonlinearThreeStatePlant) | P_min_star*P_el_n | |
| SI.Power | P_init (from NonlinearThreeStatePlant) | Start value for P | |
| Physical Constraints | |||
| Modelica.Units.SI.Power | P_el_n (from PartialElectricPowerPlant) | 300e6 | Nominal power of plant |
| SI.Power | P_n (from PartialBalancingPowerProvider) | 300e6 | Nominal power of plant |
| Real | P_min_star (from NonlinearThreeStatePlant) | 0.2 | Fraction of nominal power (=20% of nominal power) |
| Real | P_max_star (from NonlinearThreeStatePlant) | 1 | Fraction of nominal power (=100% of nominal power) |
| Real | P_grad_max_star (from NonlinearThreeStatePlant) | 0.12/60 | Fraction of nominal power per second (12% per minute) |
| Base.PartloadEfficiency.PartloadEfficiencyCharacteristic | EfficiencyCharLine (from NonlinearThreeStatePlant) | TransiEnt.Producer.Electrical.Base.PartloadEfficiency.ConstantEfficiency() | choose characteristic efficiency line |
| SI.Time | H (from NonlinearThreeStatePlant) | 6 | Time constant of plant (For easy definition of J) |
| SI.Inertia | J (from NonlinearThreeStatePlant) | P_el_n*2*H/(2*simCenter.f_n*Modelica.Constants.pi)^2 | Lumped moment of inertia of whole power plant |
| SI.Time | t_startup (from NonlinearThreeStatePlant) | 0 | Startup time (P=0 during startup) |
| SI.Time | t_min_operating (from NonlinearThreeStatePlant) | 0 | Minimum operation time |
| Boolean | smoothShutDown (from NonlinearThreeStatePlant) | true | shut down process will be smoothed - power gradient will be limit by 'P_grad_operating' |
| SI.Time | MinimumDownTime (from NonlinearThreeStatePlant) | 0 | Minimum time the plant needs to be shut down before starting again |
| SI.Time | T_plant (from NonlinearThreeStatePlant) | 0.63/P_grad_max_star | Time constant of first order model representing plant dynamics |
| SI.MassFraction | CO2_Deposition_Rate (from NonlinearThreeStatePlant) | 0 | Fraction of CO2 that is deposited via CCS |
| Base.CCS.NoCCS | CCS_Characteristics (from NonlinearThreeStatePlant) | Base.CCS.NoCCS() | Choose characteristic efficiency losses due to CCS |
| Integer | quantity (from NonlinearThreeStatePlant) | 1 | amount of power plant blocks into which nominal power is split |
| Statistics | |||
| Modelica.Units.SI.Efficiency | eta_total (from PartialElectricPowerPlant) | 0.6 | Total efficiency of plant for emission calculation |
| EnergyResource | typeOfResource (from PartialElectricPowerPlant) | EnergyResource.Conventional | Type of energy resource for global model statistics |
| PrimaryEnergyCarrier | typeOfPrimaryEnergyCarrier (from PartialElectricPowerPlant) | PrimaryEnergyCarrier.BlackCoal | Type of primary energy carrier for co2 emissions global statistics |
| Boolean | integrateElPower (from PartialElectricPowerPlant) | simCenter.integrateElPower | true if electric powers shall be integrated |
| Boolean | integrateCDE (from PartialElectricPowerPlant) | simCenter.integrateCDE | true if CDE shall be integrated |
| Boolean | calculateCost (from PartialElectricPowerPlant) | simCenter.calculateCost | true if costs shall be calculated |
| EnergyResource | typeOfBalancingPowerResource (from PartialBalancingPowerProvider) | EnergyResource.Conventional | Type of energy resource for global model statistics |
| Integer | nSubgrid (from NonlinearThreeStatePlant) | 1 | Index of subgrid for moment of inertia statistics |
| Block control › Frequency Control | |||
| Boolean | isPrimaryControlActive (from PartialBalancingPowerProvider) | true | |
| Boolean | isSecondaryControlActive (from PartialBalancingPowerProvider) | false | |
| Boolean | isExternalSecondaryController (from PartialBalancingPowerProvider) | true | False, provider generates its own control setpoint (only for lumped plants) |
| SI.Time | t_SB_act (from PartialBalancingPowerProvider) | simCenter.t_SB_act | Maximum reaction time for SB |
| Modelica.Units.SI.Power | P_el_grad_max_SB (from PartialBalancingPowerProvider) | 0.02*P_n/60 | Maximum power gradient for secondary balancing (default: 2%/min) |
| Initialization | |||
| Boolean | set_P_init (from NonlinearThreeStatePlant) | true | Use of P_init or calculation of P_init from grid (CPP) |
| Real | P_init_set (from NonlinearThreeStatePlant) | P_el_n | Initial or guess value of turbine power |
| Expert Settings | |||
| TransiEnt.Components.Turbogroups.Base.GradientLimitingChoices | powerGradLimChoice (from NonlinearThreeStatePlant) | TransiEnt.Components.Turbogroups.Base.GradientLimitingChoices.GradLimInFirstOrder | options of gradient limitation |
| Boolean | fixedStartValue_w (from NonlinearThreeStatePlant) | false | Whether or not the start value of the angular velocity of the plants mechanical components is fixed |
| SI.Time | Td_GradientLimiter (from NonlinearThreeStatePlant) | simCenter.Td | Time constant of integrator |
| Boolean | useThresh (from NonlinearThreeStatePlant) | simCenter.useThresh | Use threshould for suppression of numerical noise |
| Real | thres (from NonlinearThreeStatePlant) | simCenter.thres | If abs(u-y)< thres, y becomes a simple pass through of u. Increasing thres can improve simulation speed. However to large values can make the simulation unstable. A good starting point is the choice thres = tolerance/1000. For too small values, the power plant is never turned off. |
| Real | thres_hyst (from NonlinearThreeStatePlant) | 1e-10 | Threshold for hysteresis for switch from halt to startup (chattering might occur, hysteresis might help avoiding this) |
| Boolean | useHomotopyVarSlewRateLim (from NonlinearThreeStatePlant) | simCenter.useHomotopy | true if homotopy shall be used in variableSlewRateLimiter in turbine (true might avoid circular equalities, false might help if 0/0 occurs in power plant) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Interfaces.Electrical.ActivePowerPort | epp (from PartialElectricPowerPlant) | ||
| TransiEnt.Basics.Interfaces.Electrical.ElectricPowerIn | P_el_set (from PartialDispatchablePowerPlant) | Electric power setpoint | |
| TransiEnt.Basics.Interfaces.Electrical.ElectricPowerIn | P_SB_set (from PartialBalancingPowerProvider) | Secondary balancing setpoint | |
| Modelica.Blocks.Interfaces.BooleanInput | useCCS (from NonlinearThreeStatePlant) | true, if CCS is used |