.Buildings.Fluid.Interfaces

Information

This package contains basic classes that are used to build component models that change the state of the fluid. The classes are not directly usable, but can be extended when building a new model.

Contents

NameDescription
UsersGuideUser's Guide
ConservationEquationLumped volume with mass and energy balance
EightPortPartial model with eight ports
EightPortHeatMassExchangerModel transporting four fluid streams between eight ports with storing mass or energy
FourPortHeatMassExchangerModel transporting two fluid streams between four ports with storing mass or energy
PartialEightPortInterfacePartial model transporting fluid between eight ports without storing mass or energy
PartialFourPortPartial model with four ports
PartialFourPortInterfacePartial model transporting fluid between two ports without storing mass or energy
PartialFourPortParallelPartial model with four ports for components with parallel flow
PartialTwoPortPartial component with two ports
PartialTwoPortInterfacePartial model transporting fluid between two ports without storing mass or energy
PartialTwoPortTransportPartial element transporting fluid between two ports without storage of mass or energy
PartialTwoPortVectorPartial component with two ports, one of which being vectorized
PrescribedOutletComponent that assigns the outlet fluid property at port_a based on an input signal
StaticFourPortHeatMassExchangerPartial model transporting two fluid streams between four ports without storing mass or energy
StaticTwoPortConservationEquationPartial model for static energy and mass conservation equations
StaticTwoPortHeatMassExchangerPartial model transporting fluid between two ports without storing mass or energy
TwoPortHeatMassExchangerPartial model transporting one fluid stream with storing mass or energy
EightPortFlowResistanceParametersParameters for flow resistance for models with height ports
FourPortFlowResistanceParametersParameters for flow resistance for models with four ports
LumpedVolumeDeclarationsDeclarations for lumped volumes
TwoPortFlowResistanceParametersParameters for flow resistance for models with two ports
ExamplesCollection of models that illustrate model use and test models

Generated at 2021-05-11T00:32:40Z by OpenModelicaOpenModelica 1.18.0~dev-269-g83ff1a1 using GenerateDoc.mos